Match springs, bars, and dampers to the kinematics
Generated from
content/lms/suspension-and-chassis-design/02-springs-anti-roll-and-damping/module.md; edit the source file, not this page.
Source path: content/lms/suspension-and-chassis-design/02-springs-anti-roll-and-damping/module.md
Course: Design suspension geometry that actually wins races
Estimated duration: 75 minutes
Module Overview
Translate wheel-rate targets into real hardware: springs, anti-roll bars, and damper curves.
Lessons
- Choose springs that deliver the wheel rate - 55 minutes
- Size anti-roll bars to tune lateral balance - 45 minutes
- Read the damper before you turn the knob - 55 minutes
- Tune damping to control transient response - 60 minutes